Note that if your model number is NOT listed below, Winclone will set to boot in EFI mode for Windows 8 or later. Select Hardware in the left hand column and look under Model Identifier for your model of Mac. If you are going to be restoring Windows on a partition that is smaller than the current partition, you need to shrink the filesystem first. the only way to boot into Windows each time is hold ALT and select EFI manually This indicates that the EFI Boot is pointing to the incorrect device, in some cases. To determine the model number of your Mac, go to the Apple menu and select "About this Mac" and click System Report. Launch Winclone, and your current Windows partition should appear in the Sources list. If you installed using EFI, it will cause issues with Audio and System Preferences -> Startup Disks will look for an MBR to boot from. It is a preUEFI Mac, so the Windows installation should use a BIOS/MBR overlay for the installation. This will Boot using the FAT32 BOOT Partition which will use the files on the NTFS INSTALL Partition during the Windows Setup. A 2012 Mac does not correctly support EFI boot. The Boot Mode should be set to UEFI and Secure Boot should be ON. See the screen splash to identify the key you must press to enter the firmware (if applicable). The following Macs are set to Legacy booting mode when restoring Windows, regardless of version of Windows, since the hardware does not support EFI booting Windows. Power it up and press F12 to access the BIOS Boot Menu. To enter the UEFI or legacy BIOS during boot, use these steps: Press the Power button.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |